Quote:
So I got majority of the stuff removed. The only thing I couldn't find/which hose to cap. Said there are 4 vacuum hoses that run to the carbs. Not sure which one to cap off.
I also started the bike up and its now running at a very high idle. What should I do now?
Help on these two things please.
the caps (condoms) go on the two intake (brass) fittings on the manifold closest to the engine, the other two (condoms) go on the (brass) fittings on the carbs facing the engine, two bolts go into the cylinder heads, one each. Don't run the bike without those fitting covered up you will be running lien (which could be accounting for your higher rpm) plug those things up and fire her up set the idle with the idle stop control nob on the left hand side of the bike a little ways down from where the choke knob is. Set it around 1000 -1100 rpm. hope that helped.
2007 Speedmaster and miss it!
2013 T-Bird Storm and Luvin it!
Catching a yellow jacket in your shirt at 70 mph can double your vocabulary
|