okay okay.... I started with a 1999 victory bucket. I drilled the mounting bracket rivits out and welded all the holes shut. I redrilled the mounting hole to match the factory holes in the triumph lower triple clamp. I then sent it out to chrome.Next I drilled the holes needed to run the speedo cable and trip reset. I had my painter do the bucket and lucky for me found the "guts" and outside trim ring nos off a 2003.I ran the bar wiring inside the bars to clean things up some more and still working on a plate that mounts to the upper triple clamp down to the back of bucket. This will clean up things a bit more then I will be satisfied. It feels great to look at while riding and gives it a great old school look...
