The sensor itself is mounted on your right carb, outboard side (black plastic cap,two security torx fasteners). The easiest way to accomplish a disable, is to follow the wire to atop your rear case and below your carbs. You will find a plug there, unsnap it and your done. They can be a ****** (because of the location), if you have average size hands or larger. Once you have identified the plug, form a plan, long reach needle nose pliers to stabilize it from one side and reach in from the other worked for me. Perhaps, somebody has a better method and will chime in. This seems to only quell the popping during decel.
