Quote:
I am not quite sure where you were speaking of. From the center of the stand (when up) to the back tire is approx. 5 3/4 inches. The stop pins do rub a bit on the frame as the stand moves down, but they do not prevent it from traveling into position. Perhaps there is a difference in the frame among the various years.
I meant between the rear tire and the ground with your bike on the center stand.
Mine just clears on level cement and might not clear on gravel but I haven't tried that yet since none of my gravel is level. I did add some hose clamps around the frame where the pins rest with the stand down, but it didn't increase the tire clearance much.
Phil in Northwest Arkansas
04 America, Black, Corbin seat, TORs, no AI, 34K
|