Quote:

Just ordered a centerstand from Tec Bike Parts and they are still honoring our 10 percent discount. Seem like good folks and price is definitely good.



Let us know how the installation goes and if they moved the stop pins or if they grind a flat on them like Dwight and I did. Remember that the flanged bushings go into the stand from the outside so the heads fit between the frame members, the lower frame rail socket head screws are 8mm and not 10mm as my instructions said, and the long socket head screw in the kit is needed for the bumper stop because the hex head bolt shown in that position in their photos is too short to stop the stand before it hits the exhaust (at least it was on mine with TORs).

Phil in Northwest Arkansas 04 America, Black, Corbin seat, TORs, no AI, 34K