Bonneville America Forums Forums Technical Forums Performance Mods CR35,s

Has anyone got any advice or experience on CR35 carbs. I,ve just fitted a set to my Triton Project and am about to start doing some tuning,
Don

Hi Don, Get some 130 mains in there for a starting point, perhaps 135`s if you are running individual hi-flow type filters. Did you get the 016-360`s? if so I`d recommend raising the needles a notch or 2 to begin with, I`m sure that`ll be a real good starting point for you. Cheers.

Thanks Graeme. theres 2 pics over in the Customs page. I,m having trouble loading photos and cant find the time to sit here for hours trying to make my photos smaller enough to post. I,m really run off my feet. Thanks for the carb info, as soon as I can find a bit of time I,ll be on it,
Don

Your photos are small enough, less than 200K. Like I said in my e-mail, I think the problem might be your tag. Usually when uploading photos on websites like this one, they don't like blank spaces in their file names. Both of the pics you sent me had blank spaces between "pic" and the number.

And if you haven't seen the pic of the bike Graeme, here it is:

Graeme,

Very little has been posted about these CR35 carbs over the last few years on our bikes. I wonder if you have any dyno numbers? A comparison between the usual mods(pipes, no snorkel, re-jet) with the stock carbs vs. usual mods with CR35s would be great if you have that info.