Quote:
Phil, some where on this site is a jet calculator. Maybe someone who knows will chime in.
Quote:
Quote:
I found an inexpensive D tool at http://www.bellacorse.com/bce011-14.htm
Mike is a nice guy, spent a lot of time on the phone with me to figure out what spring I needed on the Hagon shocks I was buying.
Found the jet calculator at http://www.bonnevilleamerica.com/dinqua/friar/ which did not differentiate among TORs (mine are the quieter long ones) and calculated 23.5 main jet for TORs and stock everything else. The closest main jet choices are 22 and 25 so I ordered 25s, Needle shims (just in case I need another option), a D tool, Stainless carb hex screws, and new plugs for a reasonable $31 total from BellaCorse. These parts are all listed for a Bonneville which I assume are the same for the Bonnie America. I'll see how the 25s work before making any other changes, but I think I'll just leave the blue on the pipes and check temps before and after with a non-contact thermometer.
Phil in Northwest Arkansas
04 America, Black, Corbin seat, TORs, no AI, 34K
| 
