Quote:

Quote:

Hi,
Dinquas page has been taken down but John is working to get in here.

To answer your question for draining, you will notice on the side of your carb, (one side is easy the other is in the middle of them) You will see what looks like a nipple on bottom of carb, this is the drain port. put a clear tube , fish tank air line, on this and into a mason jar or glass, there will be a round opening on the side with a screw in it. loosen it and the fuel will drain.you will be able to see the sludge in the fuel if there is any.

not a perminate fix, but you can wrap the rubber inlets with black electrical tape really good and see if that helps. or mabe some black rtv painted on. but thoes are not perminate fixes. I have heard getting the Rubber hooteses out can be a PITA!

Hope this helps.



Thanks. I will try this in the morning when there's a bit more light.
Too bad I still don't live in my hometown (Savona NY) that is right around the corner from Dinqua in Honeoye NY.

This is where you mean right?




Yep thats it

Mal: "Y'all see the man hanging out of the spaceship with the really big gun?{ref, Jayne} Man's lookin' to kill some folk. So really, it's his will y'all should worry about thwarting."