Adjust the pilot screw the right way and if you end up more than 3 turns out go up a size. These bikes come lean from the factory to get through emissions.

Disconnect one plug wire and ground, start the bike and adjust the idle up just enough for the bike to stay running.On the side still firing, turn the mixture screw in until the bike runs rough then back out until it runs rough counting the turns between the 2 points. 1/2 way between those 2 points is the correct setting.


I learned all I need to know about life by killing smart people and eating their brains.
Eat right ,Exercise ,Stay fit, Die Anyway!