I did try today and it is not straight forward had to remove ignitor both relays and rear engin brackets bolts to lay it down on the frame. I did not cut those front tabs yet to fit tank properly but question is where to move ignitor and relays or do I need use the hammer and "adjust" shape of bottom of the tank?



Grzegorz ......55 cubic inches http://www.flickr.com/photos/25172906@N06/ 904WisecoTPUSAcamsTTPignitorgutted Airbox"breath"airIntakeKeihinCR-ScarbsBlackEpcoExhaustS/SwheelsPortedPolishedHead