Hi Michael. Welcome to the forums. You bought THE classic colonial criuser! Funny thing ten years passing as the chrome cover you replaced the gfg with is not oem for your 2002
. What a beautiful motorsickle.
The LEDs draw less power than incandescents. Replacing the lamps amount to removing the tank console (three 5mm bolts) lifting up the console enough to unplug the harness and the console is ready for you to remove each rubber tube, one at a time, and peel back the rubber tube much like turning a sock inside out. Do so only enough to reveal the lamp. Replace lamp with LED lamp and unroll the rubber tube and re-install. Careful when seating the tube in the console. You want it perfectly done so the lens won't pop out on you. Then do the other two. The fourth LED is not included (the one for the highbeam) as that would drive you batty. The Neutral is bad enough after dark...
