Brad, sorry for the delay, Saturdays weather was really weird. We had all 4 seasons in one day, snow, sleet, hail, and rain and a little sunshine(Very little). Anyway I posted pictures of the tool bag in my album. I did something stupid also. I tried to paint the thing and the temp was only 40. I know better so now I will have to repaint it basic black or try to find a paint to match the bike. So the paint looks like crap, thats what you get when you try to hurry,4 steps backward. OK, the hardware, the one picture shows the inside of the bag with 10/32 fine thread allen head screws, they will be held on with steel fiber lock nuts. Its kinda hard to see but I also put a piece of metal inside for more backup support. The top bolts are also allenhead bolts which go through the existing holes in the fork brace. These will also be held in place with steel fiber locknuts. I also glued on strips of rubber for a shock mount which also protects the fork support from scratches. I put rubber washers underneath the two large bolts also. I will probably test riding it this week, we are supposed to get 60 degree weather by the end of the week.The bracket saga goes on. I hope this helps some. If you ask nicely I could send you some "Scrap" Aluminum for you to play with. What the Airlines calls scrap, I call gold!!!!
Steve
