Hi again,.
got the tacho (electronic/ PN 2211-0057/0058) and installed today, but it don't react for throttle. While switch power on, the tacho will do same as speedo, light comes up and the pointer jumps to max limit and sets down waiting, but it wont react on throttle.
(Tried to follow instruction Ronnie had wrote for 2003 america).I used the 2-pin and 3-pin connectors. The 2-pin's red connected to tacho's green(coil), green/red connected to tacho's red(hot) and blue(hot) wires. From 3-pin took the brown and connected to tacho's black(ground).
Now I just wonder could it be the 2-pin's wires should go the opposite way, as looking at an electric chart (service manual) it seems to me like green/red wire (chart nbr 49 GR --> nbr 15/14 coils R) has connection to coils ?!
All help/advice appreciated!
