What he meant is that IF you have a gunfighter seat there is a loop on the left side (clutch side) that you pull on to release the seat from the spike.
Quote:
Quote: Everybody (including the manual) says Step 1. Take the seat off. What bolt hold the seat on?
You must have a gunfighter saddle. I believe those use a key that when turned, pulls a wire to disengage the saddle from a German, WWI Imperial Helmet Spike on your rear fender.
If you have the regular saddle without a pillion, the bolt is a 12mm. If you have the pillion that bolt is an 8mm. Take the pillion off then you can get to the 12mm saddle bolt.
SOLD: 07 Black BA, 39mm FCRs, TPUSA stage 1 head, TPUSA 813 cams, TPUSA 10.8:1 pistons, TTP #3 igniter, Specialty Spares Long Cannons, Tsukayu Hard Bags. 82HP/55tq
NEW: 19 Goldwing Tour DCT
You must have a gunfighter saddle. I believe those use a key that when turned, pulls a wire to disengage the saddle from a German, WWI Imperial Helmet Spike on your rear fender. 
