To really get the carb parts clean you're gonna have to pull them and soak them in carb cleaner. Then spray them and wipe them off. And once you think-hey good job-do it again.
The floats are on the "non shiny" side or the bottom. Needles and springs on the top. The floats are held on by a hinge with a little pin on it that you can slide off and lose...or I mean clean. Amd then if you need to adjust your float level do like Ian said with the rubber tube. But check that first before you rip it apart-obviously so you know how much to change the level if need be.
Did I confuse you? Tell you what fly me over and for a pint or two I'll fix it for you. Haha!
Good luck
Blue/White, Battery Relocated, 155/45's, AI removed, Cocktail shakers
| 
