I am removing the baffles from my 2011 America. It has the stock tapered pipes which I prefer over any of the aftermarket slash cuts. I have removed the 1st baffle with a 1 3/8" hole saw. No problem. Then the next one is roughly 5-7 inches in from the back of the pipe, I cannot get a bite on the wall surrounding the baffle to use my hole saw because it is only 2 in long and the baffle is roughly 4 inches.. Someone please tell me how to go about removing that second baffle. I will probably only drill into the 3rd depending on how it sounds. Out of all the posts I have read, no one has gone into detail about this problem. I have read that the baffle is tack welded and I need to break them, however I cannont see any of the welds. Please Help so I can live longer cause this
s@%t is driving me mad... Thanks to everyone
