Quote:

Folks: What are my options to do a big bore on this bike. Is machining, etc (i.e. something I can't do on the kitchen table)required?

I'm at best an average mechanic, but I'm not opposed to doing anything. I've done plenty of work on bikes in the past and have access to folks more qualified than myself should I get in over my head. Honestly, I'd look forward to the challenge, though I must admit I'm ignorant on the work involved. Which I suppose begs the stupid question: do the kits come with instruction? Also, what other work is required if you go to a BB kit, new cam, clutch, etc?

I'm only thinking about the 904 kits out there, nothing to drastic. Any advice on manufacturers or your experience doing the work or with the results much appreciated.

TIA

john



here is a very good read on BB kits and how it's done.. web page he is a member/mod on the forum..and a will help any way he can ..and you can do the BB kitt were every you want
you leave the motor right in the bike..for the 904 kit..

you don't say were you live..maybe some other member close by had it done .and could give you info on were to take you heads & jugs for the work needed to get all you can out of the 904 BB kit..

Ed

2013 NOREAST RALLY INFO>http://noreast.webs.com/