After replacing my mirrors with some sleaker looking raddis the decision to get rid of those clunky stock signals was easy.Because my mirrors are smaller I went with the small silver bullets on the front.Now the small silver bullets on the back was too small for me,so I went with the large and for my bike I am very pleased with the look.Now if you go with the silver bullets remember there is only one wire for the power and no neutral,since the neutral is ran by grounding the light to the chassis.The potential problem you may run into,as in my case,is that your front signal brackets may not be grounded to your chassy.One of the front signals I had to remove the bracket,take the two pieces apart were they come together,scrape some of the paint,and put back together to get continuity.If you get some silver bullits I hope this will help.
