Okay. We have some progress to report. I took the carbs off, and seated the right carb on the left head and left the left carb floating so to speak.....the bike ran like garbage. As soon as i touch the throttle it stalls. Almost like it's running just on the pilot.
I took the carbs off again, lifted them over the frame and seated the left carb on the right side head, and floated right side carb. The bike ran on the right side cylinder alone, exactly the same way it runs when the left side cylinder is working properly. Rock the throttle and she roars.
So, I think I can say with some certainty that the ignition system is without a doubt, operational and intact. The right side carb is going to be the culprit here. There has to be some kind of blockage that I can't find or see or a mechanical issue that I'm missing.
I've sprayed every port,jet and orifice on the carb with carb cleaner. I spray in one hole, watch it come out another hole. Looked threw the jets. Pulled the needle, diaphragm, and slide everything looks like it's in working order. I didn't remove the float, just because that little spring that holds it on looks like a mofo to put back on.
The new gasket for the right side engine cover won't ship for about 10 days, so I have some time to figure out what to do next.
