Quote:
what kind of quirks?
When using the foot pedal for amperage control, there is no readout of the amperage setting on the control panel. AND the control knob for the maximum setting when using the foot pedal is ON the foot pedal. Which means You have to bend down under your bench to set the max. Not a big deal, but certainly odd.
Also separate amperage controls for AC and DC on the panel. The foot pedal still has the knob so amp settings have one knob for AC/DC. Again not a big deal, just odd.
One thing I should mention is that if you weld like I do in most scenarios, you leave all amperage setting at maximum or near maximum and control everything with the foot pedal anyway so it's moot. When trying to weld 16ga tubing at odd angles, it's nice to control the maximum amps so as to not slip and blow a hole in it. WHICH is how I discovered the other oddities.
It really does weld very well though! In that regard I am pleased and impressed. 
01010100 01110010 01101001 01110101 01101101 01110000 01101000 <3
| 
