Hello everyone, I just ordered a set of Rivco pullback risers for my 2010 Speedmaster, now I have read that I will be able to use the standard cables but do I have to re-route any of them and if not how tight are the cables with these risers fitted eg: no pulling on the throttle cables making the bike rev or clutch cable.
Talking of fitting the risers do they bolt straight on to the triple tree I have heard that some risers you have to drill out the mounting bolt holes by a couple mm in the triple tree I don't want to do that if I put the stock risers back on the bike.
And one last question do we use the mounting bolts from the stock risers or do you get a set with the Rivco risers cheers.
