I made them , yes. I bought the stuff from J&P Cycle, used stainless brake line with the AN3 fittings and chrome banjo with the AN3. I had to machine a special double banjo bolt since the banjo fitting on top of the trans is thicker than a standard banjo so my double banjo bolt was really like a 2 1/2 banjo bolt.I machined the banjo bolt out of a stainless bolt of larger dia. I made the brackets out of stainless plate I had and polished.
The banjo bolt on top of the trans was 10mm X 1.25.

I learned all I need to know about life by killing smart people and eating their brains.
Eat right ,Exercise ,Stay fit, Die Anyway!