Anyone fitted risers off a 2011 Speedmaster.

Check out the new Gallery

wicked red 1100
by mag10, August 21

first ride
by NemoJr, April 1

Steve McQueen inspired
by Feral, November 28

GaRally22
by chy, September 18

Print Thread

Anyone fitted risers off a 2011 Speedmaster. #444010 05/10/2011 6:15 AM
Joined: Nov 2010 Posts: 98 Hervey Bay Qld choco OP Member
OP choco Member Joined: Nov 2010 Posts: 98 Hervey Bay Qld	Hello I just asking if anyone has fitted risers from a 2011 Speedmaster to a earlier model Speedy. I noticed the 2011 risers pullback more than the ones on my 2010 bike so it may improve the riding postion for me. If anyone has done this swap I want to know if all the standard cables and brake hose fitted cheers. Good Roads On A Good Bike What Else Do You Need Out Of Life.

Re: Anyone fitted risers off a 2011 Speedmaster. choco #444011 05/10/2011 11:18 AM
Joined: Jan 2005 Posts: 18,825 East Helena, Montana FriarJohn "Lighten up, Francis."
FriarJohn "Lighten up, Francis." Joined: Jan 2005 Posts: 18,825 East Helena, Montana	There are plenty of aftermarket risers that will give you the same pull back. And with stepped bolts you don't even have to drill the top yoke. BA.com Caretaker \| Friarsride \| jb.com

Re: Anyone fitted risers off a 2011 Speedmaster. FriarJohn #444012 05/11/2011 12:41 AM
Joined: Nov 2010 Posts: 98 Hervey Bay Qld choco OP Member
OP choco Member Joined: Nov 2010 Posts: 98 Hervey Bay Qld	Quote: There are plenty of aftermarket risers that will give you the same pull back. And with stepped bolts you don't even have to drill the top yoke. Thanks for your reply I am now starting to look at the Rivco risers again far cheaper to buy than the Triumph items cheers. Good Roads On A Good Bike What Else Do You Need Out Of Life.

Moderated by bennybmn, chy, mert

Link Copied to Clipboard

2025 Arkansas Rally
by roadworthy - 04/24/2025 7:57 PM

Bonneville America Forums Forums Technical Forums General Tech Anyone fitted risers off a 2011 Speedmaster.