Bonneville America Forums Forums Technical Forums General Tech Clutch slipping

I just did the very thing you are in for now. I did it with out any of the specialty tools ( it would have probably been easier to but it only took about 2 hours to do the whole job). If its been slipping for a year you will need friction plates. If you would have caught it earlier. you could have gotten away with just springs. I got the barnett clutch and spring kit for $165. With the gasket and new oil I was near $200. The job is not that hard. It was actually pretty fun, and interesting. Word to the wise There is a beveled ring inside the clutch basket make sure you put it back the way it comes out. Attention to detail is the most important thing on such a job. I got a copy of the manual on hard drive I can e-mail it to ya if you need it.