Kuryakyn brake pedal part #8022. Fits Harley Davidson '99-'03 XL 883/1200 Customs and '03 FXDWG.
After removing the rubber on the stock brake pedal a shim of some sort (part of an aluminum can works, thanks snekeptp) must be put inside the new pedal for it to snug up.
Kuryakyn shifter pedal part #8004.
To install this pedal the shifter arm must be removed from the bike. Remove the rubber from the stock pedal and then cut off the pedal from the arm. Drill a hole into the arm for the new pedal. The hole size you drill depends on if you wish to tap the hole or not. The pedal can be threaded into the arm or put on with a nut.
