Quote:
UNI sells a great cleaner/oil kit. Both are sprays. I've had my UNI for 5 years and only clean/reoil it once a year. I spray the cleaner on it throughly inside and out and work it in good with my fingers. Then rinse with hose pushing on all the foam with fingers.
Let it completely dry and re-oil with the spray. I lightly spray the inside and out as evenly as I can and work it in with my fingers. I DO NOT use that much oil - definitely less than advised by many oiling instructions. I wipe off exterior before installing. You can use the UNI with no oil, but I think lightly oiled is the best.
+1.... except for the no oil. They're designed to be used with oil. No oil and you're letting dirt into your engine.
And after oiling the filter as described and letting it set for a spell, I blot it well with a paper towel until it gets very little oil in the towel.
Contra todo mal, mezcal; contra todo bien, también
| 
