OK, regarding the above trouble shooting question here's what's happening and what I've done to this point:
I have no illumination to the light bar and the driving light is also out. Main headlight is fine.
I checked all the wire connections inside the lights, they all seem fine.
I have checked the accessory light fuse (and all the other fuses for that matter)All still solid. I even switched out the accessory light fuse to the headlight fuse and it lite the lamp so I'm fairly certain the fuses are not the issue.
I pulled everything back apart and noticed that I flatten out a few inched of the wires running under the support bar when I attempted to install it. I sliced the black wire jacket off carefully to reveal some pretty flat wires. Not sure if that is the issue.
If the wires where compromised during my install and indeed shorted out, would that blow the driving lamp?
I THINK I may need to replace the wires from the split (where they go to both lamps) I really don't know what else to do.
Any more help.....
