It is a universal round-bar fit. I would caution that if you decide on the Givi 600/601, the instructions state to cut off the excess mount rod once you position the screen where you want it. I thought I'd be smart and not cut anything, thus having the entire length of rod as adjustment. Only later did I notice the 2 very small dings in the tank from the mount rod ends (they are rubber capped which didn't allow for a scratch) where they had contacted the tank on full lock turns. Once mounted in a nominal position you can carefully do full lock turns and see how much rod you absolutely have to cut off, it's not much, it ultimately depends on how you position things, you may not have to cut anything. Just do a careful check before you start jamming. It is a great screen.
