Quote:
The old Bings in my 64 do the job nicely. All I had to do with mine was take them apart and give them a good cleaning but sounds like a less skilled person tried to work on yours before you. Bending the float tabs rather than replace the needle.
Yep, I understand the slide Bings are easy to set up; R75 has the more temperamental Bing CV and this one has been roughed up a bit. UPS just received the rebuild kit so I should be good to go soon: new floats, needle valves, O rings, gaskets and slide diaphragms. Then I'll have a good baseline to set idle and balance (no vacuum outlet so that's set by tach and ear...).
A positive attitude may not solve all your problems, but it will annoy enough people to make it worth the effort. Herm Albright (1876 - 1944)
| 
