Neutral Safety Switch Triumph part number: T1190014
Bike Bandit Part Number: 1387721
New Neutral Switch Installed - followup with pics Thread's first post, Authored by and courtesy of Gary Storms (
Blue05Speedmaster)
Quote:
Replaced the Neutral Switch (dealer $24.00 plus crush washer) today and have pictures here as promised. Hope they show up or else I will need help getting them to show.
The switch was leaking from the electrical connection end. It also showed signs of wear on the pin end were it touches the slider inside the transmission. This is after 20,980 miles. I changed my oil at the same time and it was already drained when I removed the switch so no oil came out of the switch port in the transmission.
New and old (left side) switches
Neutral switch port in upper right . large port is where the oil filter attaches.
This shows the pin wear (one on left side)
I suspect that others with similar mileage would have similar wear which in my opinion is significant.
FYI - Great Nm torque wrench for this small size stuff
Hope they are here and hope this helps others with similar problem _OIL LEAK TO REAR OF OIL FILTER
Gary
