Hey Guys, I need help! I'm doing my fork oil change (BADLY needed!) and the first fork seems to be stuck in the collapsed position! I'm using the instructions I got off of here together with the manual. I pulled out the spacer, washer and spring, and the inner tube lowered into the outer tube. I did push down on it since I thought it wasn't all the way down, but now, no matter what i do, I can't extend the inner tube. I've tried everything, rotating the inner and outer tube while tapping (hard and soft), and even put the spring back in with a deep well socket to put spring pressure on it while tapping gently. I've got it hanging now under the tension from the spring to see if it will unseat itself if left alone. Unless someone here has any better ideas, it sounds like a trip to Triumph up in Ft. Collins, hope not though!
