Well after a bit of confusion with my bars I have them back and dimpled for internal wiring.
I have had no luck in sourcing components to make the cables, new speedmaster.com get theirs from Barnett so thats who I will use as they deal with Triumph - Just need to wait the couple of weeks for them to get here. You can get the elbows and stuff custom made but it works out a whole lot cheaper just buying them as a pre made unit. Good exersize to go through though.
Its winter now so got the stuff off the bike and doing the measure, I understand that it doesn't matter if they are longer than needed.
Next thing is the brake cable and wiring.
I know you can switch the brake cable to the other side on the speedmaster to save getting a cable made, any issues with doing this (ony an interim measure as I may route the throttle cables to the other side while I wait for all the cables to be made)
Also does anyone know if you can buy a wiring harness exstension kit as a plug and play from the handlebars onto the headlight (like harley's) to save on the splicing until such times as I can be bothered to do the internal wiring
Uploaded with
ImageShack.us
