130's 42's and thruxton needles. Uni drop in, AI's removed.
3 1/2 turns out and slight popping on deceleration.
Took her on a run and opened the throttle. At about 3/4 to full she stuttered and seemed to miss. I reduced speed and at 1/2 throttle she was fine.
I've since put 2 shims under the thruxton needles and still had to go out 3 1/2 turns with slight popping!
Is this a science or voodoo magic.
1. whats with the high speed shudder
2. b****y popping!!
3. How would I know if there was an air leak, thus causing the popping.
Jon
