Quote:

Great looking bike! Any clearance issues with the pipes? I'm looking at a set which is how I found your thread.

How bout a closeup of the battery holder? I was thinking about doing that then adding a fake oil tank for the electrickery.

One more, did you just cut the rear fender struts to use with that fender?

S.



not sure what you are asking- there are no clearance issues with the pipes- they are not full scrambler pipes though- i used only the front sections from the head to where the the wrap starts then bent and welded up the rest- the best pic i have of the battery box is on pg 5 of this post- if you plan on building one of these there are a couple of things to keep in mind- the rear of your bike either needs to be slammed to the dirt(10.5 in shocks)or you're gonna need a shorter battery- if not the terminals will make fireworks on the underside of the swingarm- here's a pic of my fender setup- no struts, it bolts directly to the frame- hope this helps ya out- good luck-