Staffo,you ask have I relocated my rear brake resevoir,yes. If you look towwards the top front of the right shock the plastic cup/resevoir is their on a home made alunimum bracket I made. That alunimum bracket was made out of a flat plate,I cut and heated it to bend it. First time I played with alunimum as far as heating and bending it. The master cylinder is there also,I made all the linkage and brake pedal.I put a couple of different holes in the linkage so I could change the feel of the brake pedal. I ordered the rear brake hose from J&P Cycle I got the fittings and hose through them.
