Bonneville America Forums Forums Technical Forums General Tech '03 America electrical confusion

Update: I tested the R/R and had these results:

Using Diode Test Mode (as suggested in the linked thread):

Red Test Lead on Black/White pin:

1. 560
2. 575
3. 571

Black Test Lead on Black/Red pin:

1. 592
2. 606
3. 610

Then I tested the stator. All three connections were at about 30 when idle (choked) and between 60 and 70 with rpm added (no tach).

I charged the battery and tested at the terminals again. Once the bike was warmed up, I was getting about 13.4 at idle and 13.1 with rpm. I tested it again later (cold bike) and the numbers reversed.