This was intended to be a winter project but I recently had to pull the carbs and while waiting on parts I decided to refit my old oil pressure gauge (since it could not work with the new oil cooler) It is not in the way and appears to actually work. The bracket is combined with the old cover up plate for the wiring (a 06 and older only problem) I used some old brake line and I had the gauge, so I only had to buy a double banjo bolt and a AN3 hose end. less than $15 investment (not counting my time of course)  
05 speedmaster - 1100cc, 11:1 racing pistons, Carillo rods, thunderbike cams, ported and polished head, 2mm over intake and exhaust valves, Barnett kevlar clutch, scepter pipes, oversize manifolds, 45mm HSR's, TTP stage 4 firestarter
| 
