Quote:

Knowing me it will be a two or three day job, but I will have learned something AND be able to do it in much less time in the future.



Keith, Take it from me, it is a simple job.

Don't rush it and you will find it quite easy.

The last shims I got were from the local bike wrecker because none of the local bike dealers keep them in stock. (Even then I got them on a part exchange basis so I still have no spare shims) I was fortunate that he had them after sorting through a box of shims with a set of callipers.

Have you got the Haynes manual, the instructions in that are quite good?

FrankW Ex Speedmaster rider, went to the Dark Side now riding an America.