Quote:

Confused. When I took off the oil feed pipe to remove the camshaft there was a crush washer right under the bolt head but none under the oil feed pipe that contacts the head. When looking at the diagram on BikeBandit they show a crush washer both on top and under the oil feed pipe. Was there suposed to be one under it when I took it off?



I found the same thing the first time I did mine. They are actually copper washers.

When you look in the Triumph parts manual it only shows 2 in the diagram. In the parts listing it says there are 4.

I went to my local brake centre and bought 4 copper washers and put them on both sides of the pipe where it connects to the cam bearing cap.

Last edited by FrankW; 10/21/2010 7:10 AM.