Bonneville America Forums Forums Technical Forums Accessories Analog Clock

Does anynoe have the Analog Clock that can be installed instead of a tach? Does it have a light?

Thanks,

They are $135. from the TriumpheStore. Here's a link:

Analog clock

It just plugs right in and the set/adjust buttons are already on the dash. And, yes, it has a light.

135...ugh why not just get one of these.
http://www.newbonneville.com/html/clocks_and_thermometers.html

i thought $60 was kinda steep for a clock.

I've got one of these (http://www.clocks4bikes.com/handlebar.html)

Here's a pic (and part #) of the Triumph clock.

Part # A9938018

I definately want one of these dash clocks. I hate trying to get my watch out from under my coat sleeve, and then peering at the tiny watch dial to see the time. This is going on my short wish list!

I used a "bike watch" on my steering stem nut, and mounted an LED in the front of the tank console. It's been working great for 6 years now. Instructions on my website.

thats nice....and the price is not that bad.
thanks

I also have a handlebar mounted clock (Formotion - illuminated). I like have my tach in the dash which is a bit harder to do elsewhere. Clocks are very easy add ons. Also I like the white dials with black numbers to match the speedo and tach.

I have the same one Soren has from clocks4bikes.com and it's perfect and the price is really reasonable. Besides when it was broken while putting in new risers they replaced it for free.

I've been using the stem mount one for about 2 years now. It's awesome and only $40. I got the backlight on mine so it was $50. Never had any problems with it.

http://www.clocks4bikes.com/Stem_Mount_Clocks.html

That reminds me; After like 5 years, the 2nd battery in my
clocks4bikes stem-nut mount clock has died. But I like it
anyway.
Uncle Charlie

I bought a used set (clock + thermometer) made my Marlin Corporation. As it turned out the thermometer didn't work so I contacted Marlin who promptly replaced it for free. A USED SET and they covered for me. I was, and am impressed. Their gauges and clocks are super high quality and they have an impressive selection.

http://marlins-motorcycles.com/

Arrrggh, I just put on my new risers (which look great), and low and behold, my handlebar clock does not fit between them. I guess, I need to get a new clock too!!

I think I'm going to go with stem mount.

~Brent

I hate it when that happens. Ya tinker and ya slave and that's what you get in return! Have a look at the Marlin stuff for selection alone Brent. And ummmm, don't forget to submit a pic or two of those new risers.

Thanks to everyone for their input...it's why I love this forum. I bought blue LED's for the Speedo & tach (came as a set) but I don't have a tach. I thought about adding the analog clock and changing out the stock light with the LED light if it was possible. However, I like price of the stem nut clock and will probably go with that. Thanks again & ride safe.

I put one in and just love it.... Best thing I've done to my trump... I never wear a watch, so this was a must have. I can't believe how many times< no pun intended.. I look at it.. V.

One of my friends bought one of their clocks and stood there holding a hose on it full force for quite some time to test it. He said if it was gonna fail he wanted it to fail now while still under warranty. He never had a problem with it.

I have the "Formotion" P-Mount Handlebar mount with the Round backlit white clock. Looks good and can be mounted anywhere on the handlebar. I did have a problem with the first battery change (three years later) in that there was corrosion on the battery crossover strap and it broke during the battery replacement attempt. I received a new one at a discounted price so not overly distressed about it.