Hey all,
Wanted to relay my apparent CDI issue and see if there is any more consensus or advice / solutions to the cold start issue that seems to happen with the procom unit.
It appears that my stock CDI is toast, but I haven't been 100% sure of that (or that it is the only issue) because I tried a procom unit and it has the startup issues. Basicaly, it won't start with choke on, it will with choke off, but won't take throttle for a few minutes until warmed up. To me, this is not an acceptable fix. Like others, before I started having issues, my bike would start with full choke and I could ride away on choke until warmed up. I read all the way through this thread (and other threads) and it seems that some others have the same problem with the procom but what I can't tell is if trying the various downloadable maps has fixed the cold-start issue??
I'm really frustrated with this because both my stock CDI and the procom have the same start up problem - they won't take the choke and I have to wait MUCH longer to ride away than before. The difference is, the bike seems to be warming up and responding better with the procom. If one of the downloadable maps takes care of the start problem I will be happy. Any thoughts??
A few notes: I have an '05 TBA AI removed, stock Airbox and filter, 122.5 mains, 42 pilots, stock exhaust. Bike has the CA vapor canister. I disconnected that and plugged all vacuum ports to see if it matters; didn't seem to. Procom setting is supposed to be 4, but I talked to Procom and my model year could be setting 4, 5, or 6. 6 seems to run the best so far.
Thanks!
