Duane,
I haven't bought a replacement windshield yet but I've done a little research for Memphis Shades. I couldn't find where anyone had put ALL the information in one post so here is what I found.
The Memphis Fats and Slims use the same mounting hardware so I'll use those for the example. Many posts say the mounting hardware for the Suzuki Marauder will fit our bikes, but the Memphis Shades website shows hardware for two Marauders; the VZ800 Marauder 97-04 with part number MEM9907, and the VZ1600 Marauder 04 with part number MEM9974. I searched the BA message base and then the old archives and found one old archive message with a reference of successfully using MEM9907. So I knew it was the Suzuki VZ800 Marauder hardware that I wanted. If anyone can verify this, please jump in. I assume the same would go for other brands of windshields as well.
BTW Duane, the hardware mounts to the fork tubes between the triple tree clamps and not on the shroud below the clamp. If you look and feel, the shroud is somewhat flimsy sheet metal and you don't want to fasten anything to that. Cat has a good picture example higher up in this thread or you can look at the mounting instructions at the Memphis Shades website.
Windshield mounting example
Good luck.
John
