When I took the bike out today my horn, brake light, and turn indicators were out. These are all on the same 10 amp fuse. When I got back home I checked the fuse and it was blown. I cleaned all the fuse block connections, replaced the fuse, and checked.
Everything works but with one hitch. With the right turn signal blinking, the dash green indicator does not blink. The left turn signal works and the dash indicator blinks normally. I checked under the dash multi-pin connector, checked both right turn signals themselves, checked the two connectors behind the headlight, ones under the seat, and everywhere else I cound find. Each of those I unplugged and replugged back in. Still, the indicator is usually barely visible with the right signal and fine with the left. All other functions are fine (horn, brake light, etc.).
I can't help but think this is somehow related. Something in the right signal circuit may have blown the fuse. I rode the bike two days before and all was working fine including the dash light. Does anyone have an explanation or suggestion as to what I can check.
Also, battery is fine and ground and hot connections were good and tight. Appreciate any help.
