Yep, that REALLY helped.
Lets see,
1. Select the best main jet. Ok?
2. Select the best needle height/clip position.Ok?
3. Adjust the best float height. Ok?
4. Then dial in pilot circuit. Okkkk?
THATS IT!
Well dang!, What was I thinking? BRILLIANT!
Now IF your wondering just WHAT the BEST is, they have that covered too;
"If your not sure which main jet is correct, use the one that is FOR SURE NOT INCORRECT"
WELL DANG! What was I worried about!?
(BE SURE TO GET THAT TECH. PHONE NUMBER. YOU'LL NEED IT.)
