Since there's a little bit of interest, I'll give you a few more details.
In order to clear the shocks, I had to put a spacer between each Easy Bracket and case.
I ordered a
12" square sheet of 1/2" black Polyethylene from Mc-Master-Carr. I then cut a piece for each case, and fastened it using
stainless button-head bolts,
stainless fender washers, and
thin stainless Nylok nuts. All of this was sealed using black silicone. I could have replaced the nuts and washers by cutting, drilling, and tapping a small metal plate to place inside each case - but I decided to try the easy way first. This method has worked just fine.
The computer fits nice and snug, and the cases have not leaked in the rain. Just to be safe, I usually place the computer in a plastic trash bag before locking it inside the case.
