I have big problems with my TBA. First the bike worked great at high speeds,but when I started slowing down to 50 mph or less the bike cut out and was very difficult to start (scary on the A roads). Looked for air leaks,change plugs etc could not find anything.Took to dealers, they carried out top end strip and regound valves, set clearances, check piston rings and tolerances, compression was restored.
The bike runs better now, however when I slow down for traffic, the bike again cuts out and is difficult to start. One of the baffles in the exhaust is collapsing and the dealer said this is cause, sounds a bit dodgy to me. Any one any ideas. TBA is 4 year old and has not that many miles on.
