Quote:

I may try to find alternate slide springs that are as long as the OEM springs and have the same rate as the GPZ springs. I personally think the OEM springs are too much, & the GPZ springs are not enough.



what size are the holes in your slides? if they are not 3mm or larger that will effect the speed of slide opening.

05 speedmaster - 1100cc, 11:1 racing pistons, Carillo rods, thunderbike cams, ported and polished head, 2mm over intake and exhaust valves, Barnett kevlar clutch, scepter pipes, oversize manifolds, 45mm HSR's, TTP stage 4 firestarter