OK, I rejetted my carbs. After grunting, sweating and uttering a few choice words, my mother never taught me, I got all the bits and pieces back together. However, after opening the fuel petcock, I noticed a leak, first around the drain on the left bowl. I checked the drain closed and then noticed it looks like the gas is coming from the the joint.
I need to get some small allen head wrenches to access the new bowl screws and I will do that tomorrow. I'm going to check the screws and make sure they are tight, hopefully without over doing it.
If that doesn't work, I'm going to drain and drop the bowl to check the seal, make sure it's sitting properly and nothing on it.
Anyone, with carb rework experience, have any other suggestions or cautions to pass on? Thanks much.

Blue/White 2007 TBA, Thruxton needles, Unifilter, AI removed, Polaris Bellmouth, Bubs, Nology Coils/wires, Lightbar, Ricor Intiminators, Hagon Nitros, Tall Sissy Bar w/luggage rack, Dart flyscreen & Lowers. 130 Mains, TrueGel Battery MG12-BS.