 Custom Rear Peg Hangers
|
Joined: Jan 2005
Posts: 761
3/4 Throttle
|
OP
3/4 Throttle
Joined: Jan 2005
Posts: 761 |
Hey Guys - We just finished the full scale prototypes of our new Rear Peg Hangers. They're made of 3/8" 304 polished stainless steel and move the passenger peg forward by about 10" and lower by about 3". Jessica says they are MUCH more comfortable than the stock hangers. We have several designs so if the flames are a bit aggressive for your taste, we have what we call the scalloped design which is more classic looking. Forgive us for the quality of the pictures. Take a look and let us know what you think...   -brent
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Sep 2005
Posts: 186
Adjunct
|
|
Adjunct
Joined: Sep 2005
Posts: 186 |
Nice! I'd like to see a pic of the scallops too.
"Eric Von Zipper will return!"
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Feb 2005
Posts: 1,806
Learned Hand
|
|
Learned Hand
Joined: Feb 2005
Posts: 1,806 |
your killing me, they look great now if there was a chrome swingarm cover . I know I know shutup Chris
Chris
Pain heals, Chicks dig scars, and Glory last forever.
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Feb 2006
Posts: 3,017
Loquacious
|
|
Loquacious
Joined: Feb 2006
Posts: 3,017 |
makes me consider keeping my gunfighter seat on insteading of switching back to solo
Mark
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Feb 2006
Posts: 12
Complete Newb
|
|
Complete Newb
Joined: Feb 2006
Posts: 12 |
Any chance of picture of scollop set
gerzurgan
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Jan 2005
Posts: 1,320
Learned Hand
|
|
Learned Hand
Joined: Jan 2005
Posts: 1,320 |
Brent, you still going to put out that tribal design peg hanger? That'd be the one I'd be most interested in, you had pics of that a few months back.
Michael D. Rodriguez
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Dec 2005
Posts: 258
Adjunct
|
|
Adjunct
Joined: Dec 2005
Posts: 258 |
Looks nice Brent, will keep them in mind for a possible future addition, or when I run out of mints.
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Jun 2005
Posts: 534
Adjunct
|
|
Adjunct
Joined: Jun 2005
Posts: 534 |
brent i ordered flame finishers which i'm waiting for any chance of changing my order to a set of these new ones i really would appreciate it if you could
steve finlayson from spain
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Jan 2005
Posts: 11,126 Likes: 13
Should be Riding
|
|
Should be Riding
Joined: Jan 2005
Posts: 11,126 Likes: 13 |
Dangit. I'm going to your website right now and see about placing an order for the scalloped ones.
Q: What do boganvillas and flames have in common?
Blowing gravel off rural roads
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Jun 2005
Posts: 534
Adjunct
|
|
Adjunct
Joined: Jun 2005
Posts: 534 |
i like the ones in the pictures above if you could send a set of those instead of the solo finishers it would be great brent cheers
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Jan 2005
Posts: 11,126 Likes: 13
Should be Riding
|
|
Should be Riding
Joined: Jan 2005
Posts: 11,126 Likes: 13 |
Well, the nearest I could find to a pic of the scalloped ones was this:  help me out huh?
Blowing gravel off rural roads
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Jan 2005
Posts: 761
3/4 Throttle
|
|
OP
3/4 Throttle
Joined: Jan 2005
Posts: 761 |
Here's a drawing of the scalloped/fluted design. We'll also be doing the tribal design in both peg hanger and solo finisher.  -brent
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Jan 2005
Posts: 11,126 Likes: 13
Should be Riding
|
|
Should be Riding
Joined: Jan 2005
Posts: 11,126 Likes: 13 |
Hi Brent, Put me down for one. If you have a sketch of the tribal, shoot one my way, but the way Lynn is with the oem passenger peg location, I'll take the first non-flame custom rear peg hanger set you have available. PM me and I'll call you with my cc number. Hopefully this deal can go down before the GA Rally! 
Blowing gravel off rural roads
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Jul 2005
Posts: 2,254
Oil Expert
|
|
Oil Expert
Joined: Jul 2005
Posts: 2,254 |
freakin awesome , how about a look at the tribal and a price
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Jan 2005
Posts: 12,164 Likes: 1
Should be Riding
|
|
Should be Riding
Joined: Jan 2005
Posts: 12,164 Likes: 1 |
I absolutely love the flames! Bet you pick up at least 10hp with those too  Soren
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Jan 2005
Posts: 1,500
Learned Hand
|
|
Learned Hand
Joined: Jan 2005
Posts: 1,500 |
Actually Soren the Scallops will give you 10hp, the flames will give you at least another 12 or 13hp!
Learning from my mistakes... again and again.
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Jan 2005
Posts: 761
3/4 Throttle
|
|
OP
3/4 Throttle
Joined: Jan 2005
Posts: 761 |
Here's a pic of the final prototype of the fluted/scalloped design. Final price and ETA are TBD but it shouldn't be too long. Thanks again for all ya'lls help!!  -brent
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Jan 2005
Posts: 1,457
Learned Hand
|
|
Learned Hand
Joined: Jan 2005
Posts: 1,457 |
Hey Brent,
Can they be powdercoated?
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Jun 2005
Posts: 305
Adjunct
|
|
Adjunct
Joined: Jun 2005
Posts: 305 |
Brent, get em (the flamed ones)  in stock and I will buy em. Vegas
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Jan 2005
Posts: 977 Likes: 1
3/4 Throttle
|
|
3/4 Throttle
Joined: Jan 2005
Posts: 977 Likes: 1 |
You knew it was coming..... are they gonna be available in.....black, for the chrome-a-phoebes. I tried to place an order on Friday, guess you guys must of left work early  .I will try again on Monday... do you have any of the fender bibs in stock???.... ride safe....Gordon
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Jan 2005
Posts: 761
3/4 Throttle
|
|
OP
3/4 Throttle
Joined: Jan 2005
Posts: 761 |
Matt - You bet. They can indeed be powdercoated.
-brent
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Jan 2005
Posts: 11,126 Likes: 13
Should be Riding
|
|
Should be Riding
Joined: Jan 2005
Posts: 11,126 Likes: 13 |
I want my MTV, err fluted/scalloped rear peg hangers!
Hey Brent, Would you know of an american paint that matches the Triumph silver color? The Flamboyant Silver that is. Got a friend that is going to freehand some pinstripes. And if I find some for him, hmm, maybe my ride too!?.
Blowing gravel off rural roads
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Mar 2005
Posts: 239
Adjunct
|
|
Adjunct
Joined: Mar 2005
Posts: 239 |
Hey Brent! Been waiting patiently with credit card in hand for these to become available (and possibly the custom cable retainer). Any word on their availibility date?
Thunderpipes, 135 mains, TBS needles, snorkel & AI removed
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Jan 2005
Posts: 11,126 Likes: 13
Should be Riding
|
|
Should be Riding
Joined: Jan 2005
Posts: 11,126 Likes: 13 |
Throb, Leave Brent alone will ya?  You might confuse him and then he'll cross ship my hangers to you! If all goes as planned, (yeah, right!) I should have some pics of Brent's fluted hangers hanging on Vera by next week. And a floating rotor. Lately the Ben Franklins have been flying out of the billfold. Anyone want to buy a slightly used front rotor? Measures 4.1mm in thickness and I can assure you that it is NOT warped! (I might be but not the too thin disk)
Blowing gravel off rural roads
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Jan 2005
Posts: 12,877
Should be Riding
|
|
Should be Riding
Joined: Jan 2005
Posts: 12,877 |
Benny
Black & Silver '02
Too many mods to list
Not enough miles ridden
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Jan 2005
Posts: 761
3/4 Throttle
|
|
OP
3/4 Throttle
Joined: Jan 2005
Posts: 761 |
Hey Moe - Your Peg Hangers went out today. The polishers really did a great job. We also got the cable retainers back. I'll be putting them on the site shortly.
Thanks again!
-brent
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Jul 2005
Posts: 2,254
Oil Expert
|
|
Oil Expert
Joined: Jul 2005
Posts: 2,254 |
any pics/prices for the tribal hangers
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Jan 2005
Posts: 761
3/4 Throttle
|
|
OP
3/4 Throttle
Joined: Jan 2005
Posts: 761 |
Not yet. The price of polishing was quite a bit less than I expected so the final price of these will be in the $250 range. This is a guess based on what we have now. I should have taken pics of the Moe's fluted ones but I wanted to make sure they went out today. He'll get some good ones for us the day he gets them ;-)
-brent
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Jan 2005
Posts: 11,126 Likes: 13
Should be Riding
|
|
Should be Riding
Joined: Jan 2005
Posts: 11,126 Likes: 13 |
Brent, Yes, I got the UPS tracking number in my email earlier today. THANKS! Can't wait, actually I can. My four letter word is spelled K I T C H E N and no, I ciant count kneethar. Floating rotor too?!
Blowing gravel off rural roads
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Jan 2005
Posts: 11,126 Likes: 13
Should be Riding
|
|
Should be Riding
Joined: Jan 2005
Posts: 11,126 Likes: 13 |
Quote:
Not yet. The price of polishing was quite a bit less than I expected so the final price of these will be in the $250 range. This is a guess based on what we have now. I should have taken pics of the Moe's fluted ones but I wanted to make sure they went out today. He'll get some good ones for us the day he gets them ;-)
-brent
Man oh man. Eyes feel the pressssure...Thursday is the day they should arrive. They will go on the same time as the 440's. Thursday night is going to be it. I need an excuse to ride
Blowing gravel off rural roads
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Jan 2005
Posts: 761
3/4 Throttle
|
|
OP
3/4 Throttle
Joined: Jan 2005
Posts: 761 |
Quote:
Floating rotor too?!
Yep!!
-brent
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Mar 2005
Posts: 239
Adjunct
|
|
Adjunct
Joined: Mar 2005
Posts: 239 |
Floating rotor? Isn't that a UFO?
Thunderpipes, 135 mains, TBS needles, snorkel & AI removed
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Jan 2005
Posts: 11,126 Likes: 13
Should be Riding
|
|
Should be Riding
Joined: Jan 2005
Posts: 11,126 Likes: 13 |
Quote:
Floating rotor? Isn't that a UFO?
The thin one might turn into one. However, if ever a rotor turned frisbee, Ade would have had the most opportunities
Actually, the rotor will end up on my garage wall along with two front sprockets, two rear sprockets, a broken chrome chain guard, etc...No old spark plugs though! Well maybe two on the bench
Blowing gravel off rural roads
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Jan 2005
Posts: 12,877
Should be Riding
|
|
Should be Riding
Joined: Jan 2005
Posts: 12,877 |
Make a clock! 
Benny
Black & Silver '02
Too many mods to list
Not enough miles ridden
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Jan 2005
Posts: 761
3/4 Throttle
|
|
OP
3/4 Throttle
Joined: Jan 2005
Posts: 761 |
I think Benny wants you to make a clock...
-brent
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Jan 2005
Posts: 12,877
Should be Riding
|
|
Should be Riding
Joined: Jan 2005
Posts: 12,877 |
All the cool kids are doin it... 
Benny
Black & Silver '02
Too many mods to list
Not enough miles ridden
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Jan 2005
Posts: 761
3/4 Throttle
|
|
OP
3/4 Throttle
Joined: Jan 2005
Posts: 761 |
I haven't seen that, is it yours? That's freakin' AWESOME!! I'm SOOO stealing your idea -brent
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Jan 2005
Posts: 12,877
Should be Riding
|
|
Should be Riding
Joined: Jan 2005
Posts: 12,877 |
Yeah man. Rockwell Tools sells clock guts and hands n what not. For like 5 bucks. Only thing is I got a clock with a stem that is WAY too long, so I have a piece of 3/4 MDF behind that aluminum plate to space it out, so the clock itself is like 3 inches out from the wall... kinda akward. Get a shorter stem if u do it. The plate is just home depit grade asluminum plate, 6 inches wide, real thin, ya know? Then I rivited it to the top and bottom holes. Oh yeah and its HEAVY so find a stud when mounting it
Benny
Black & Silver '02
Too many mods to list
Not enough miles ridden
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Jan 2005
Posts: 11,126 Likes: 13
Should be Riding
|
|
Should be Riding
Joined: Jan 2005
Posts: 11,126 Likes: 13 |
That is pretty slick Ben!
How thin was your rotor? Looks like it was bout 4.3mm. Did you use the guts from a wally world 5 dallar clock?
Should damaged Rotors be made into clocks,
I'll have one, Benny has one.
How many would Ade have?
PS: You haven't found a home for your floor clock yet? Goodness gracious...
Edited: I should read the whole thread before replying  Wally world, yeah.
Last edited by moe; 03/23/2006 11:14 AM.
Blowing gravel off rural roads
|
|
|
Re: Custom Rear Peg Hangers
|
Joined: Jan 2005
Posts: 12,877
Should be Riding
|
|
Should be Riding
Joined: Jan 2005
Posts: 12,877 |
Yes it has a home. Got a #6 screw in hook about 3 inches long, bend the hook out just a bit straighter to slip thru one of the holes in the rotor, and found a stud in the garage to screw it into. Holding just fine No walmart! I got this clock and these hands. Total cost, 6 bucks.
Benny
Black & Silver '02
Too many mods to list
Not enough miles ridden
|
|
|
|
|
