Quote: Al, you did it a bit differently than I did, I pulled the spade connector out of the plastic end of the rectifier wires and joined them with a spade connector and shrink tube. ................We really need to get this with pics in the tech vault, it seems to come up about once every other month.
In hindsight, since I had the regulator off the mount, I should have just pulled it out from under the bike with that side of the connector. Than, moving to the workbench, I could have easily spliced into that wire and did a much neater solder joint. Than, just re-fish that connector and new wire back in place. I see a re-do coming up.
